Secret Links

This page is for staff use.

MACH-181 In-Process Content

Skills List (PDF)

Legend:

⨉: Does not exist or is incomplete.

▲: Built but needs work: see notes.

◯ : Complete and ready for upload.

✔ with strikethrough: Uploaded to Canvas.

Startup

Syllabus

Needs:

  • To be updated with the new OER Textbook link.
  • To be updated with lab / office hours.
  • Decision needs be made on whether the pacing guide section should be included in the syllabus.

    Decision is made to make the course homepage the single-source-of-truth for the pacing guide.
    Waiting on replacement language for the Syllabus and Handbook.

  • Synthesize with old syllabus? Check handbook has equivalent coverage?
  • Does the canvas syllabus have/need a printable version?

Handbook

Needs:

Other Canvas Pages / Content

  • Shop Safety

    Needs to be extended for coverage and consistency with the Syllabus & handbook.

    Safety Quiz / verification.

  • Measuring Tools
    • Built with links to OER.
    • Nothing in OER for granite surface plate:
      Needs something made or to have that topic removed/relocated.      Discussion Topic
    • Measuring chapter quiz.
  • Scheduling Quiz needs email links, completed instructions & submission.
  • Add Bandsaw as a topic?

    Out of time.

  • Surface Speed and RPM

    Needs a quiz? A project? Etc.

    Going to let this be covered in first module of each machine pathway.

Manual Lathe

Canvas Pages

  • Module 1: Lathe Setup and Safety
    • OER links
    • Project section language.
    • Needs Lathe ID quiz.
    • Needs Lathe Setup Mastery checkoff sheet.
  • Module 2: Facing & OD Turning
    • OER links
    • Needs Turning Mastery Content in Project section.
    • Facing to length web page done and ready to link?
    • Order of Ops
  • Module 3: Indicator Post
    • OER links
    • Needs dead-center content.
    • Order of Ops
  • Module 4: Tap Guide (Body & Piston)
    • OER links
    • Needs Assembly / Fitment content, or to remove that skill-topic.
    • Needs milling on lathe parts content.
    • Order of Ops
  • Module 5: Lathe Dog Post

Web Pages

Manual Mill

Canvas Pages

  • Module: 1 Mill Setup and Safety
    • OER links
    • Needs BTC-specific tool examples
    • Needs demo of pneumatic drawbars
    • Needs demo of mag-base & noga-arm for vise squaring.
    • Mill ID quiz.
    • Vise squaring challenge.
    • Order of Ops
  • Module: 2.1 Mill Steps 1

    Needs: Setting Z-Origin

    • OER links
    • DRO - Inc from touch off, move amount to take.
    • Choosing Parallels / Making sure there is enough material above the jaws.
    • Touch off: Rotating Tool
    • Touch off: Paper Method
    • Setting Axial Depth of Cut
    • Order of Ops
  • Module: 2.2 Mill Steps 2
    • OER links
    • Setting the X origin / DRO operation
    • Edge Finder Offset
    • Calculating Tool Positions Ahead of Time
    • How tool Diameter Changes the DRO Location
    • Order of Ops
  • Module: 2.3 Mill Steps 3
    • OER links
    • DRO 1/2 Button
    • Spot Drilling / Depth
    • Controlling Drill Depth with Quill Stop & Knee Found in OER
    • Order of Ops
  • Module: 3 T-Nut
    • OER links
    • DRO: setting origin to center of stock
    • Dovetail Jaws
    • Grip Stock & Finishing to Thickness
    • Tool Paths for Multiple Features
    • Order of Ops
  • Module: 4 Jaw-Top Work Stop
    • OER links None found
    • Working from Stock Corner
      • Stock Offset Calculation / Center Part in Stock

        ((Stock − Finish Dim) ÷ 2) ± .100

      • Calculating Coordinates
      • Tool Radius / DRO Offset (adding and subtracting tool rad per part feature)
      • Slotting
    • Order of Ops
  • Module: 5 Lathe Dog: Mill Parts
    • OER links
    • Pick center for origin X/Y (rel datum dims below)
    • Mill Vise Work Stop
    • Scribing with Height Gauge
    • Scribing against Protractor
    • Datum Dims: DRO Origin X-left, Y-center
    • Order of Ops

Web Pages

Measuring

Web Pages

Notes for Future Revs:

OER textbook links could be formatted as:

Rather than:

How to give a Staff-Member a day off on Bookings?

FAI Exit Ticket

  • How much time on practice / redo?
  • How much time on finished part after you "got it"?

Order of Ops Submission

Worksheet

  • Add Time on Practice / Redos (shop time)
  • Time on Finished Article (project time)
  • Prep Time (online)
    • Reading
    • Homework
    • Order of Ops Writing & Calculations